STONE

Stone: Recommendation for 30mm Absolute Black / Nero Assoluto

HDA a Heavy Duty undercut Anchor is set in a strong Absolute Black 30mm granite.
Here you can see pull out test results of an HDA by blick designed for XXL FTF panels.

Average 15mm anchor pullout:

Stone: Recommendation for Jura Marmor

Here you can see pull out test results of fixing in Jura Marmor made in 30mm panels with 20, 15 and 10mm undercut anchors. Based on this recommendation a facade of Greenfauld School in Glasgow was made.

Stone: Recommendation for Kashmir White Granite

Here you can see pull out test results of fixing in Kashmir White Granite made in 30mm panels with 16mm undercut anchors.

Stone: Recommendation for Welch Slate

Here you can see pull out test results of fixing in welch slate made in 30mm panels with 15mm and 10mm undercut anchors. Note: because of specific construction of the stone secret undercut fixings and visible fixings are recommended to fix slates. Masonry dowel-pin type anchors are not recommended.

Stone: Recommendation for Blue Moon Sandstone

Here you can see pull out test results of fixing in Blue Moon Sandstone made in 50mm panels with 17mm undercut anchors.

Stone: Recommendation for Spanish Slate

Here you can see pull out test results of fixing in spanish slate made in 30mm panels with 15mm undercut anchors. Note: because of specific construction of the stone secret undercut fixings and visible fixings are recommended to fix slates. Masonry dowel-pin type anchors are not recommended.

Stone: Recommendation for Heron Sandstone

Here you can see pull out test results of fixing in 30mm sandstone Heron with 15mm undercut anchors.
There are two fixings compared:
– undercut anchor only,
and
– undercut anchor set with resin to equalize stress.

More about this material find on www.gruszecki.com.pl

Stone: Recommendation for Basaltina

Here you can see pull out test results of fixing in 20mm Basaltina panels with 15mm undercut anchors.

More about this material find on www.basaltina.it

Stone: Recommendation for Moca Cream Limestone

Here you can see pull out test results of fixing in Moca Cream Limestone made in 30mm panels with 15mm undercut anchors.

Stone: Recommendation for Snow Ray Light Limestone

Here you can see pull out test results of fixing in Snow Ray Light Limestone made in 40mm panels with 16mm undercut anchors. The system was used on facade of Saifi Plaza Project in Lebanon.

Stone+Alu: Recommendation for Marble – Aluminium Honey Comb

Presented recommendation is for marble – aluminium honey comb 10+10mm in which 15mm undercut hole was made. Presented results were used in Project Recommendation for Palacio de Hierro and structural design for a reference project Palacio de Hierro in Mexico.

Recommendation for VeroStone® Slim

Presented recommendation is for VeroStone® Slim 5+15mm tile in which 15mm undercut hole was made. One sample test only was made. More about: www.vero-stone.de

GRC: 3 anchor optimisation.

Here you can see an optimisation of fixing in GRC made for 3 types of anchors and different undercut holes in the same material lot.

GRC: Recommendation for moderline by BRUK.

Here you can see optimisation of fixing in GRC made by Bruk sp. z o.o.
more about material: www.modernline.info.pl

GRC: Recommendation for FCC.

GRC by FCC is here presented. Panels 20mm thick are tested for pull out, 15mm undercut holes were made.

UHPC: Recommendation for YERG.

Here you can see pull out test results of fixing in YERG UHPC concrete made in 15mm panels with 10mm INFILL undercut holes. 10mm undercut anchors set in 13mm panels gave following results: 2456N / 552lbf. More about material and producer find on www.yerg.pl

GRC: Recommendation for Milke

Here you can see Blick’s recommendation for fixing in GRC by Milke. The movie shows 3 different Blick’s anchors set at 15mm and 10mm. More about material and producer find on www.milke.se

GRC: Recommendation for BtB-Radzymin

Here you can see pull out test results of fixing in GRC made in 18mm panels with 15mm undercut holes. 11mm undercut anchors set in 18mm panels gave following results: 1963N / 441lbf. More about material and producer find on www.btb-radzymin.pl

GRC: Recommendation for BtB-Radzymin SHEAR LOAD

Here you can see shear load test results of fixing in GRC made in 18mm panels with 11mm undercut anchors, which gave following results: 3250N / 730lbf (AVG). More about material and producer find on www.btb-radzymin.pl

TERAZZO: Recommendation for NorthStone.

Here you can see pull out test results of fixing in NorthStone Terrazzo made in 20mm panels with 15mm and 10mm undercut anchors made in Rovereto and Brescia line. More about this interesting technology you can find on the movie What Bretonerastone is?. More about material and producer find on www.northstone.it

UHPC: Recommendation for DIE

Here you can see pull out test results of fixing in DIE UHPC concrete made in 15mm panels with 12mm undercut anchors. Presented anchor pullout refers to single test only. More about material and producer find on www.gtecz-engineering.com

Concrete: Recommendation for UHPC Stella Stone.

Here you can see pull out test results of fixing in VHCT concrete made in 20mm panels with 15mm undercut holes. 10mm undercut anchors set in 20mm panels gave following results: 1880N / 422lbf. Blick’s undercut anchors were used in Library of Naval Academy project. More about material and producer find on www.vhct.pl

GRC: Recommendation for Morgan & Möller.

GRC by Morgan & Möller is here presented. Panels 20mm thick are tested for pull out, 15mm undercut holes were made. More about the material on www.morgan-moller.com

GRC: Recommendation for RiederC.

GRC by Rieder is here presented. Panels 13mm thick are tested for pull out, 10mm undercut holes were made. More about the material you can find at: www.rieder.cc

GRC: Recommendation for Betonproject.

GRC by Betonproject is here presented. Panels 15mm thick are tested for pull out, 11mm undercut holes were made.

GRC: Recommendation for BoMAbeton

Here you can see pull out test results of fixing in BoMaBeton GRC concrete made in 12mm panels with 10mm undercut anchors. More about material and producer find on www.bomabeton.pl

GRC: Recommendation for KROE

Here you can see pull out test results of fixing in KROE GRC concrete made in 15mm panels with 12mm undercut anchors. More about material and producer find on www.kroe.eu

Undercut anchor used: BSA-SQ10.11.M600

HPL: Recommendation for Trespa 10mm

Presented recommendation is for 10mm HPL Trespa with 7mm undercut anchor by Blick type BSA-S10.06.M30.
AVG Pullout values for 8mm anchor: 4502 N / 1012 lbf.
HPL represents highest pull out values considering 8 and 10mm panels.
More about at www.trespa.com

HPL: Recommendation for Trespa 8mm

Presented recommendation is for 8mm HPL Trespa with 6mm undercut anchor by Blick type BSA-S10.06.M630.
AVG Pullout values for 6mm anchor: 2920 N / 656 lbf.
HPL represents highest pull out values considering 8 and 10mm panels.
More about at www.trespa.com

Ceramic: Recommendation for manufakturaceramiczna.pl

The movie presents Blick’s Recommendation for hand made ceramic.
Curved panels are tested to recognize pull out values and calculate max weight of panels allowed.
Anchor tested HDA-S10.15.M830.
More about the material on www.manufaktura-ceramiczna.com.pl

Ceramic: Recommendation L’Altra Pietra 20mm

The movie presents Blick’s Recommendation for ceramic by L’Altra Pietra 20mm.
More about material on www.altrapietra.it

Ceramic: Recommendation for butech 12mm+

The movie presents Blick’s Recommendation for ceramic by butech 12+. The “+” sign stands for glass fibre mesh reinforcement.
More about material on www.butech.net

Ceramic: Recommendation for 6-12mm Ceramic EN14411

The movie presents Blick’s Recommendation for ceramic made based on EN 14411. Panels 6mm to 12mm are tested. We recommend to use panels 10mm thick. 8mm panels may be used based on separate training and consultancy.

Ceramic: Recommendation for Laminam 12mm+

The movie presents Blick’s Recommendation for ceramic by Laminam 12+.
The “+” sign stands for glass fibre mesh reinforcement.

Ceramic: Recommendation for 8mm* butech

This is a Blick’s recommendation for fixing 8mm ceramic by Butech with enforcing mesh on back site of the panel.
There are two types of anchors tested and results presented:
– HDA-S10.10.M835,
and
–BSA-S10.06.M635.
More about the material on www.butech.net
*- ceramic tiles are enforced by mesh on back site. After panel’s break all fractions stay together.

Ceramic: Recommendation for 6mm The Size Calacatta

The movie presents Blick’s Recommendation for 6mm ceramic by TheSize.
NOTE: The technology for 6mm ceramic requires extra training and consultancy. Available on request only.

Ceramic: Recommendation for 6mm Tubadzin

The movie presents Blick’s Recommendation for 6mm ceramic by Tubadzin.
NOTE: The technology for 6mm ceramic requires extra training and consultancy. Available on request only.

Recommendation for Cosentino Silestone.

Presented recommendation is for Cosentino Silestone 20mm tile in which 15, 10, 8 and 6mm undercut holes were made.

Ceramic: Recommendation for Mosa.

Presented recommendation is for Mosa Ceramic 10mm tile in which 7mm undercut hole was made.

Fibrecement: Recommendation for Equitone fibrecement.

Presented recommendation is for Equitone Pictura 12mm tile in which 10mm undercut hole was made and 8mm Tectiva with 6mm undercut hole. AVG Pullout values for 8mm Tectiva: 928 N / 208 lbf. More about at www.equitone.com

Fibrecement: Recommendation for SVK fibrecement.

Presented recommendation is for SVK fibrecement Colormat 12mm tile in which 10mm undercut hole was made, 10mm Colormat with 7mm undercut hole and 8mm Puro with 6mm undercut hole. AVG Pullout values for 8mm Puro: 1186 N / 267 lbf. AVG Pullout values for 8mm Puro: 1039 N / 233 lbf. More about you can find on www.svk.be

Fibrecement: Recommendation for Scalamid.

Presented recommendation is for Scalamid fibrecement 8mm tile in which 6mm undercut anchor is fixed.
AVG Pullout values for 6mm: 1011 N / 227 lbf.
More about you can find on www.scalamid.com

Concrete: Recommendation for Ivanka concrete panels

A very short recommendation for Ivanka concrete Panels.
More about products you can find on www.ivanka.concrete.com

Recommendation for Ceramic Glas (Glasskeramik).

A very short recommendation is for Ceramic Glass Keramikglass (Structuran® / Decoran®)