AluStructure 50
… our most universal system
AluStructure 50 is a modular subconstruction system designed for all typical facade materials of a weight up to 50kg per panel.
Designed for easy installation with possibility to adjust substructure in 3D.
Panels are 2D adjustable and once installed are easy to replace.
List of features:
- Aluminium construction EN-AW 6060 T6+6
- Modular concept
- Easy construction
- Extra wide slide-in entry for easy installation
- Fire resistant class A
- Fixed and sliding points
- For FTF Floor-To-Floor panel sizes
- Easy panel replacement
- Curtain walling systems compatible
- Hangover 26-310mm
- For close contact installation 26mm hangover,
- Suggested maximum panel weight 50kg/110lb
- Based on project recommendation and training max panel weight can reach up to 120kg/265lb
- Full architectural details library: *.dwg, *.pdf
- For stone, ceramic, GRC concrete, UHPC concrete, fibrecement, glass, HPL…
- Compatible with all Blick’s undercut anchors, even HDA
- Components supplied in 3100mm rails, other lengths on request
- Extra slots for M8 nuts for more safety
- Extra slots for rivetnuts for heavy panels
- available in India and UAE
AluStructure 50 applications.
The AS50 is designed for all most common materials:
- Vitroce glass panels by Blick:
- hard natural stones: granite, welch slate, spanisch slates, basalt, limestone, sandstone,
- conglomerate stones: Compac, Technistone, Quarella, Silestone,
- terrazzo: Northstone,
- hard concrete: UHPC, VHCT, GRC,
- ceramic, porcelain and porcelaingres: Lapitec, Mirage, SMG, TheSize, Laminam,
- fibrecement: SVK, Equitone,
- HPL: Trespa 8mm and 10mm,
- and other materials like: Richlite, Structuran, Decoran, Noeparies,
HDA undercut anchor is protected by international patent or international patent applications owned by blicksystem.
AluStructure 50 strong points:
universal slot
AluStructure 50 has a universal slot for M6, M8 and rivet application.
Easy assembly
The AS50 profile has two grooves for precise drilling and easy assembly.
One groove is for M6 and M8 nuts.
The other one is for rivets and undercut anchor positioning.
X-wide slide-in entry
An easy installation is a very important factor especially considering large FTF Floor-To-Floor panels.
For a faster installation an extra wide slide-in entry is applied.
FEA approved
AluStructure 50 was carefully designed and tested using newest science technology available. Assumptions of Finite Element Analysis by Blick are exactly correlated with real life tests results during CWCT regime tests in BET Ireland. AS50 (shortly) is able to carry 50kg/110lb panels. Based on structural design the weight can rise up to 70kg/155lb.
One shape
AluStructure 50 is designed as one mirror profile shape.
Just turn it upside down and lock when hanging the panel.
Design is easier, storage space reduced.